Edge-Core WA6202AM EU Guida Utente Scaricare il pdf (Pagina 114)

System Configuration

6-60

Radio Channel – The radio channel that the access point uses

to communicate with wireless clients. When multiple access

points are deployed in the same area, set the channel on

neighboring access points at least four channels apart to avoid

interference with each other. For example, in the United States

you can deploy up to four access points in the same area (e.g.,

channels 36, 56, 149, 165). Also note that the channel for

wireless clients is automatically set to the same as that used

by the access point to which it is linked. (Default: Channel 60

for normal mode, and channel 42 for Turbo mode)

Auto Channel Select – Enables the access point to

automatically select an unoccupied radio channel.

(Default: Enabled)

Note: Check your country’s regulations to see if Auto

Channel can be disabled.

Transmit Power – Adjusts the power of the radio signals

transmitted from the access point. The higher the transmission

power, the farther the transmission range. Power selection is

not just a trade off between coverage area and maximum

supported clients. You also have to ensure that high-power signals do not interfere

with the operation of other radio devices in the service area. (Options: 100%, 50%,

25%, 12%, minimum; Default: 100%)

Note: When operating the access point using 5 GHz channels in a European

Community country, the end user and installer are obligated to operate the device

in accordance with European regulatory requirements for Transmit Power Control

(TPC).

Maximum Supported Rate – The maximum data rate at which the access point

transmits unicast packets on the wireless interface. The maximum transmission

distance is affected by the data rate. The lower the data rate, the longer the

transmission distance. (Options: 54, 48, 36, 24 Mbps; Default: 54 Mbps)

Maximum Associated Clients – Sets the maximum number of clients that can be

associated with a VAP interface at the same time. (Range: 1-64 per VAP interface:

Default: 64)

Antenna ID – Selects the

antenna to be used by the

access point; either the

5 GHz integrated antenna

(if included with the unit) or

an optional external

antenna. The optional

external antennas (if any)

that are certified for use with the access point are listed in the drop-down menu.

Selecting the correct antenna ID ensures that the access point's radio transmissions

Normal Mode

Turbo Mode

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 331 332

Commenti su questo manuale

Nessun commento

Edge-Core WA6202AM EU Guida Utente Pagina 114

Commenti su questo manuale

Prodotti e manuali riguardandi Punti d’accesso WLAN Edge-Core WA6202AM EU